4 The technique illustrated here with our fringe enumerators is a powerful and important one. It's an example of what's sometimes called **cooperative threading**. A "thread" is a subprogram that the main computation spawns off. Threads are called "cooperative" when the code of the main computation and the thread fixes when control passes back and forth between them. (When the code doesn't control this---for example, it's determined by the operating system or the hardware in ways that the programmer can't predict---that's called "preemptive threading.") Cooperative threads are also sometimes called *coroutines* or *generators*.
6 With cooperative threads, one typically yields control to the thread, and then back again to the main program, multiple times. Here's the pattern in which that happens in our `same_fringe` function:
8 main program next1 thread next2 thread
9 ------------ ------------ ------------
12 (paused) calculate first leaf
13 (paused) <--- return it
14 start next2 (paused) starting
15 (paused) (paused) calculate first leaf
16 (paused) (paused) <-- return it
17 compare leaves (paused) (paused)
18 call loop again (paused) (paused)
19 call next1 again (paused) (paused)
20 (paused) calculate next leaf (paused)
21 (paused) <-- return it (paused)
24 If you want to read more about these kinds of threads, here are some links:
26 <!-- * [[!wikipedia Computer_multitasking]]
27 * [[!wikipedia Thread_(computer_science)]] -->
29 * [[!wikipedia Coroutine]]
30 * [[!wikipedia Iterator]]
31 * [[!wikipedia Generator_(computer_science)]]
32 * [[!wikipedia Fiber_(computer_science)]]
33 <!-- * [[!wikipedia Green_threads]]
34 * [[!wikipedia Protothreads]] -->
36 The way we built cooperative threads here crucially relied on two heavyweight tools. First, it relied on our having a data structure (the tree zipper) capable of being a static snapshot of where we left off in the tree whose fringe we're enumerating. Second, it relied on our using mutable reference cells so that we could update what the current snapshot (that is, tree zipper) was, so that the next invocation of the `next_leaf` function could start up again where the previous invocation left off.
38 It's possible to build cooperative threads without using those tools, however. Some languages have a native syntax for them. Here's how we'd write the same-fringe solution above using native coroutines in the language Lua:
40 > function fringe_enumerator (tree)
42 coroutine.yield (tree.leaf)
44 fringe_enumerator (tree.left)
45 fringe_enumerator (tree.right)
49 > function same_fringe (tree1, tree2)
50 local next1 = coroutine.wrap (fringe_enumerator)
51 local next2 = coroutine.wrap (fringe_enumerator)
52 local function loop (leaf1, leaf2)
53 if leaf1 or leaf2 then
54 return leaf1 == leaf2 and loop( next1(), next2() )
55 elseif not leaf1 and not leaf2 then
61 return loop (next1(tree1), next2(tree2))
64 > return same_fringe ( {leaf=1}, {leaf=2} )
67 > return same_fringe ( {leaf=1}, {leaf=1} )
70 > return same_fringe ( {left = {leaf=1}, right = {left = {leaf=2}, right = {leaf=3}}},
71 {left = {left = {leaf=1}, right = {leaf=2}}, right = {leaf=3}} )
74 We're going to think about the underlying principles to this execution pattern, and instead learn how to implement it from scratch---without necessarily having zippers or dedicated native syntax to rely on.
77 ##Exceptions and Aborts##
79 To get a better understanding of how that execution pattern works, we'll add yet a second execution pattern to our plate, and then think about what they have in common.
81 While writing OCaml code, you've probably come across errors. In fact, you've probably come across errors of two sorts. One sort of error comes about when you've got syntax errors or type errors and the OCaml interpreter isn't even able to understand your code:
85 Error: This expression has type int list
86 but an expression was expected of type string list
88 But you may also have encountered other kinds of error, that arise while your program is running. For example:
91 Exception: Division_by_zero.
93 Exception: Failure "nth".
95 These "Exceptions" are **run-time errors**. OCaml will automatically detect some of them, like when you attempt to divide by zero. Other exceptions are *raised* by code. For instance, here is the implementation of `List.nth`:
98 if n < 0 then invalid_arg "List.nth" else
101 | [] -> failwith "nth"
102 | a::l -> if n = 0 then a else nth_aux l (n-1)
105 Notice the two clauses `invalid_arg "List.nth"` and `failwith "nth"`. These are two helper functions which are shorthand for:
107 raise (Invalid_argument "List.nth");;
108 raise (Failure "nth");;
110 where `Invalid_argument "List.nth"` is a value of type `exn`, and so too `Failure "nth"`. When you have some value `bad` of type `exn` and evaluate the expression:
114 the effect is for the program to immediately stop without evaluating any further code:
116 # let xcell = ref 0;;
117 val xcell : int ref = {contents = 0}
118 # let bad = Failure "test"
121 Exception: Failure "test".
125 Notice that the line `xcell := 1` was never evaluated, so the contents of `xcell` are still `0`.
127 I said when you evaluate the expression:
131 the effect is for the program to immediately stop. That's not exactly true. You can also programmatically arrange to *catch* errors, without the program necessarily stopping. In OCaml we do that with a `try ... with PATTERN -> ...` construct, analogous to the `match ... with PATTERN -> ...` construct:
136 else if x = 2 then raise (Failure "two")
137 else raise (Failure "three")
139 with Failure "two" -> 20
141 val foo : int -> int = <fun>
147 Exception: Failure "three".
149 Notice what happens here. If we call `foo 1`, then the code between `try` and `with` evaluates to `110`, with no exceptions being raised. That then is what the entire `try ... with ...` block evaluates to; and so too what `foo 1` evaluates to. If we call `foo 2`, then the code between `try` and `with` raises an exception `Failure "two"`. The pattern in the `with` clause matches that exception, so we get instead `20`. If we call `foo 3`, we again raise an exception. This exception isn't matched by the `with` block, so it percolates up to the top of the program, and then the program immediately stops.
151 So what I should have said is that when you evaluate the expression:
155 *and that exception is never caught*, then the effect is for the program to immediately stop.
157 Trivia: what's the type of the `raise (Failure "two")` in:
160 else raise (Failure "two")
165 else raise (Failure "two")
167 So now what do you expect the type of this to be:
169 fun x -> raise (Failure "two")
173 (fun x -> raise (Failure "two") : 'a -> 'a)
175 Remind you of anything we discussed earlier? /Trivia.
177 Of course, it's possible to handle errors in other ways too. There's no reason why the implementation of `List.nth` *had* to raise an exception. They might instead have returned `Some a` when the list had an nth member `a`, and `None` when it does not. But it's pedagogically useful for us to think about the exception-raising pattern now.
179 When an exception is raised, it percolates up through the code that called it, until it finds a surrounding `try ... with ...` that matches it. That might not be the first `try ... with ...` that it encounters. For example:
183 (raise (Failure "blah")
185 with Failure "fooey" -> 10
186 with Failure "blah" -> 20;;
189 The matching `try ... with ...` block need not *lexically surround* the site where the error was raised:
195 with Failure "blah" -> 20
197 raise (Failure "blah")
201 Here we call `foo bar 0`, and `foo` in turn calls `bar 0`, and `bar` raises the exception. Since there's no matching `try ... with ...` block in `bar`, we percolate back up the history of who called that function, and we find a matching `try ... with ...` block in `foo`. This catches the error and so then the `try ... with ...` block in `foo` (the code that called `bar` in the first place) will evaluate to `20`.
203 OK, now this exception-handling apparatus does exemplify the second execution pattern we want to focus on. But it may bring it into clearer focus if we simplify the pattern even more. Imagine we could write code like this instead:
213 then if we called `foo 1`, we'd get the result `110`. If we called `foo 2`, on the other hand, we'd get `20` (note, not `120`). This exemplifies the same interesting "jump out of this part of the code" behavior that the `try ... raise ... with ...` code does, but without the details of matching which exception was raised, and handling the exception to produce a new result.
215 Many programming languages have this simplified exceution pattern, either instead of or alongside a `try ... with ...`-like pattern. In Lua and many other languages, `abort` is instead called `return`. In Lua, the preceding example would be written:
222 return 20 -- abort early
224 return value + 100 -- in Lua, a function's normal value
225 -- must always also be explicitly returned
234 Okay, so that's our second execution pattern.
236 ##What do these have in common?##
238 In both of these patterns, we need to have some way to take a snapshot of where we are in the evaluation of a complex piece of code, so that we might later resume execution at that point. In the coroutine example, the two threads need to have a snapshot of where they were in the enumeration of their tree's leaves. In the abort example, we need to have a snapshot of where to pick up again if some embedded piece of code aborts. Sometimes we might distill that snapshot into a data structure like a zipper. But we might not always know how to do so; and learning how to think about these snapshots without the help of zippers will help us see patterns and similarities we might otherwise miss.
240 A more general way to think about these snapshots is to think of the code we're taking a snapshot of as a *function.* For example, in this code:
250 we can imagine a box:
253 +---try begin----------------+
254 | (if x = 1 then 10 |
257 +---end----------------------+
260 and as we're about to enter the box, we want to take a snapshot of the code *outside* the box. If we decide to abort, we'd be aborting *to* that snapshotted code.
263 What would a "snapshot of the code outside the box" look like? Well, let's rearrange the code somewhat. It should be equivalent to this:
267 +---try begin----------------+
268 | (if x = 1 then 10 |
271 +---end----------------------+
272 in (foo_result) + 1000;;
274 and we can think of the code starting with `let foo_result = ...` as a function, with the box being its parameter, like this:
278 in (foo_result) + 1000
280 That function is our "snapshot". Normally what happens is that code *inside* the box delivers up a value, and that value gets supplied as an argument to the snapshot-function just described. That is, our code is essentially working like this:
283 in let snapshot = fun box ->
285 in (foo_result) + 1000
288 else ... (* we'll come back to this part *)
292 But now how should the `abort 20` part, that we ellided here, work? What should happen when we try to evaluate that?
294 Well, that's when we use the snapshot code in an unusual way. If we encounter an `abort 20`, we should abandon the code we're currently executing, and instead just supply `20` to the snapshot we saved when we entered the box. That is, something like this:
297 in let snapshot = fun box ->
299 in (foo_result) + 1000
306 Except that isn't quite right, yet---in this fragment, after the `snapshot 20` code is finished, we'd pick up again inside `let value = (...) + 100 in snapshot value`. That's not what we want. We don't want to pick up again there. We want instead to do this:
309 in let snapshot = fun box ->
311 in (foo_result) + 1000
314 else snapshot 20 THEN STOP
318 We can get that by some further rearranging of the code:
321 in let snapshot = fun box ->
323 in (foo_result) + 1000
324 in let continue_normally = fun from_value ->
325 let value = from_value + 100
328 if x = 1 then continue_normally 10
331 And this is indeed what is happening, at a fundamental level, when you use an expression like `abort 20`.
334 # #require "delimcc";;
336 # let reset body = let p = new_prompt () in push_prompt p (body p);;
338 let snapshot = fun box ->
340 in (foo_result) + 1000
341 in let continue_normally = fun from_value ->
342 let value = from_value + 100
344 in if x = 1 then continue_normally 10
348 +===try begin================+
349 | (if x = 1 then 10 |
352 +===end======================+
356 let foo x = reset(fun p () ->
358 if x = 1 then k 10 else 20)
372 A similar kind of "snapshotting" lets coroutines keep track of where they left off, so that they can start up again at that same place.
374 ##Continuations, finally##
376 These snapshots are called **continuations** because they represent how the computation will "continue" once some target code (in our example, the code in the box) delivers up a value.
378 You can think of them as functions that represent "how the rest of the computation proposes to continue." Except that, once we're able to get our hands on those functions, we can do exotic and unwholesome things with them. Like use them to suspend and resume a thread. Or to abort from deep inside a sub-computation: one function might pass the command to abort *it* to a subfunction, so that the subfunction has the power to jump directly to the outside caller. Or a function might *return* its continuation function to the outside caller, giving *the outside caller* the ability to "abort" the function (the function that has already returned its value---so what should happen then?) Or we may call the same continuation function *multiple times* (what should happen then?). All of these weird and wonderful possibilities await us.
380 The key idea behind working with continuations is that we're *inverting control*. In the fragment above, the code `(if x = 1 then ... else snapshot 20) + 100`---which is written as if it were to supply a value to the outside context that we snapshotted---itself *makes non-trivial use of* that snapshot. So it has to be able to refer to that snapshot; the snapshot has to somehow be available to our inside-the-box code as an *argument* or bound variable. That is: the code that is *written* like it's supplying an argument to the outside context is instead *getting that context as its own argument*. He who is written as value-supplying slave is instead become the outer context's master.
382 In fact you've already seen this several times this semester---recall how in our implementation of pairs in the untyped lambda-calculus, the handler who wanted to use the pair's components had *in the first place to be supplied to the pair as an argument*. So the exotica from the end of the seminar was already on the scene in some of our earliest steps. Recall also what we did with v2 and v5 lists. Version 5 lists were the ones that let us abort a fold early:
383 go back and re-read the material on "Aborting a Search Through a List" in [[Week4]].
385 This inversion of control should also remind you of Montague's treatment of determiner phrases in ["The Proper Treatment of Quantification in Ordinary English"](http://www.blackwellpublishing.com/content/BPL_Images/Content_store/Sample_chapter/0631215417%5CPortner.pdf) (PTQ).
387 A naive semantics for atomic sentences will say the subject term is of type `e`, and the predicate of type `e -> t`, and that the subject provides an argument to the function expressed by the predicate.
389 Monatague proposed we instead take the subject term to be of type `(e -> t) -> t`, and that now it'd be the predicate (still of type `e -> t`) that provides an argument to the function expressed by the subject.
391 If all the subject did then was supply an `e` to the `e -> t` it receives as an argument, we wouldn't have gained anything we weren't already able to do. But of course, there are other things the subject can do with the `e -> t` it receives as an argument. For instance, it can check whether anything in the domain satisfies that `e -> t`; or whether most things do; and so on.
393 This inversion of who is the argument and who is the function receiving the argument is paradigmatic of working with continuations.
395 Continuations come in many varieties. There are **undelimited continuations**, expressed in Scheme via `(call/cc (lambda (k) ...))` or the shorthand `(let/cc k ...)`. (`call/cc` is itself shorthand for `call-with-current-continuation`.) These capture "the entire rest of the computation." There are also **delimited continuations**, expressed in Scheme via `(reset ... (shift k ...) ...)` or `(prompt ... (control k ...) ...)` or any of several other operations. There are subtle differences between those that we won't be exploring in the seminar. Ken Shan has done terrific work exploring the relations of these operations to each other.
397 When working with continuations, it's easiest in the first place to write them out explicitly, the way that we explicitly wrote out the `snapshot` continuation when we transformed this:
410 in let snapshot = fun box ->
412 in (foo_result) + 1000
413 in let continue_normally = fun from_value ->
414 let value = from_value + 100
417 if x = 1 then continue_normally 10
420 Code written in the latter form is said to be written in **explicit continuation-passing style** or CPS. Later we'll talk about algorithms that mechanically convert an entire program into CPS.
422 There are also different kinds of "syntactic sugar" we can use to hide the continuation plumbing. Of course we'll be talking about how to manipulate continuations **with a Continuation monad.** We'll also talk about a style of working with continuations where they're **mostly implicit**, but special syntax allows us to distill the implicit continuaton into a first-class value (the `k` in `(let/cc k ...)` and `(shift k ...)`.
424 Various of the tools we've been introducing over the past weeks are inter-related. We saw coroutines implemented first with zippers; here we've talked in the abstract about their being implemented with continuations. Oleg says that "Zipper can be viewed as a delimited continuation reified as a data structure." Ken expresses the same idea in terms of a zipper being a "defunctionalized" continuation---that is, take something implemented as a function (a continuation) and implement the same thing as an inert data structure (a zipper).
426 Mutation, delimited continuations, and monads can also be defined in terms of each other in various ways. We find these connections fascinating but the seminar won't be able to explore them very far.
428 We recommend reading [the Yet Another Haskell Tutorial on Continuation Passing Style](http://en.wikibooks.org/wiki/Haskell/YAHT/Type_basics#Continuation_Passing_Style)---though the target language is Haskell, this discussion is especially close to material we're discussing in the seminar.