X-Git-Url: http://lambda.jimpryor.net/git/gitweb.cgi?p=lambda.git;a=blobdiff_plain;f=week3.mdwn;h=39e472bf9a644c1bdac774790ed134f26ab7cf31;hp=9e670415f8ba936f9d88642878731e4e3f2cc6e4;hb=9625fc39cff6e36e7ba0edac98fc8fda387f17ef;hpb=ef9c59f9aa8f3f4b7d1fbe7d056a46c5efba2f16
diff --git a/week3.mdwn b/week3.mdwn
index 9e670415..39e472bf 100644
--- a/week3.mdwn
+++ b/week3.mdwn
@@ -1,3 +1,12 @@
+[[!toc]]
+
+##More on evaluation strategies##
+
+Here are notes on [[evaluation order]] that make the choice of which
+lambda to reduce next the selection of a route through a network of
+links.
+
+
##Computing the length of a list##
How could we compute the length of a list? Without worrying yet about what lambda-calculus implementation we're using for the list, the basic idea would be to define this recursively:
@@ -25,9 +34,14 @@ Some comments on this:
2. `cdr` is function that gets the tail of a Scheme list. (By definition, it's the function for getting the second member of an ordered pair. It just turns out to return the tail of a list because of the particular way Scheme implements lists.)
-3. I alternate between `[ ]`s and `( )`s in the Scheme code just to make it more readable. These have no syntactic difference.
+3. I use `get_length` instead of the convention we've been following so far of hyphenated names, as in `make-list`, because we're discussing OCaml code here, too, and OCaml doesn't permit the hyphenated variable names. OCaml requires variables to always start with a lower-case letter (or `_`), and then continue with only letters, numbers, `_` or `'`. Most other programming languages are similar. Scheme is very relaxed, and permits you to use `-`, `?`, `/`, and all sorts of other crazy characters in your variable names.
+
+4. I alternate between `[ ]`s and `( )`s in the Scheme code just to make it more readable. These have no syntactic difference.
-What is the `let rec` in the OCaml code and the `letrec` in the Scheme code? These work like the `let` expressions we've already seen, except that they let you use the variable `get_length` *inside* the body of the function being bound to it---with the understanding that it will there refer to the same function that you're then in the process of binding to `get_length`. So our recursively-defined function works the way we'd expect it to. In OCaml:
+
+The main question for us to dwell on here is: What are the `let rec` in the OCaml code and the `letrec` in the Scheme code?
+
+Answer: These work like the `let` expressions we've already seen, except that they let you use the variable `get_length` *inside* the body of the function being bound to it---with the understanding that it will there refer to the same function that you're then in the process of binding to `get_length`. So our recursively-defined function works the way we'd expect it to. In OCaml:
let rec get_length = fun lst ->
if lst == [] then 0 else 1 + get_length (tail lst)
@@ -36,7 +50,7 @@ What is the `let rec` in the OCaml code and the `letrec` in the Scheme code? The
In Scheme:
- > (letrec [(get_length
+ (letrec [(get_length
(lambda (lst) (if (null? lst) 0 [+ 1 (get_length (cdr lst))] )) )]
(get_length (list 20 30)))
; this evaluates to 2
@@ -50,7 +64,7 @@ If you instead use an ordinary `let` (or `let*`), here's what would happen, in O
Here's Scheme:
- > (let* [(get_length
+ (let* [(get_length
(lambda (lst) (if (null? lst) 0 [+ 1 (get_length (cdr lst))] )) )]
(get_length (list 20 30)))
; fails with error "reference to undefined identifier: get_length"
@@ -78,9 +92,9 @@ Here the use of `get_length` in `1 + get_length (tail lst)` can clearly be seen
And indeed, if you tried to define `get_length` in the lambda calculus, how would you do it?
- \lst. (isempty lst) zero (add one (get-length (extract-tail lst)))
+ \lst. (isempty lst) zero (add one (get_length (extract-tail lst)))
-we've defined all of `isempty`, `zero`, `add`, `one`, and `extract-tail` in earlier discussion. But what about `get-length`? That's not yet defined! In fact, that's the very formula we're trying here to specify.
+We've defined all of `isempty`, `zero`, `add`, `one`, and `extract-tail` in earlier discussion. But what about `get_length`? That's not yet defined! In fact, that's the very formula we're trying here to specify.
What we really want to do is something like this:
@@ -94,16 +108,44 @@ where this very same formula occupies the `...` position:
but as you can see, we'd still have to plug the formula back into itself again, and again, and again... No dice.
+[At this point, some of you will recall the discussion in the first
+class concerning the conception of functions as sets of ordered pairs.
+The problem, as you will recall, was that in the untyped lambda
+calculus, we wanted a function to be capable of taking itself as an
+argument. For instance, we wanted to be able to apply the identity
+function to itself. And since the identity function always returns
+its argument unchanged, the value it should return in that case is
+itself:
+
+ (\x.x)(\x.x) ~~> (\x.x)
+
+If we conceive of a function as a set of ordered pairs, we would start
+off like this:
+
+ 1 -> 1
+ 2 -> 2
+ 3 -> 3
+ ...
+ [1 -> 1, 2 -> 2, 3 -> 3, ..., [1 -> 1, 2 -> 2, 3 -> 3, ...,
+
+Eventually, we would get to the point where we want to say what the
+identity function itself gets mapped to. But in order to say that, we
+need to write down the identity function in the argument position as a
+set of ordered pairs. The need to insert a copy of the entire
+function definition inside of a copy of the entire function definition
+inside of... is the same problem as the need to insert a complete
+graph of the identity function inside of the graph for the identity function.]
+
So how could we do it? And how do OCaml and Scheme manage to do it, with their `let rec` and `letrec`?
1. OCaml and Scheme do it using a trick. Well, not a trick. Actually an impressive, conceptually deep technique, which we haven't yet developed. Since we want to build up all the techniques we're using by hand, then, we shouldn't permit ourselves to rely on `let rec` or `letrec` until we thoroughly understand what's going on under the hood.
2. If you tried this in Scheme:
- > (define get_length
+ (define get_length
(lambda (lst) (if (null? lst) 0 [+ 1 (get_length (cdr lst))] )) )
-
- > (get_length (list 20 30))
+
+ (get_length (list 20 30))
You'd find that it works! This is because `define` in Scheme is really shorthand for `letrec`, not for plain `let` or `let*`. So we should regard this as cheating, too.
@@ -111,7 +153,7 @@ So how could we do it? And how do OCaml and Scheme manage to do it, with their `
\lst. lst (\x sofar. successor sofar) zero
- What's happening here? We start with the value zero, then we apply the function `\x sofar. successor sofar` to the two arguments xn
and `zero`, where xn
is the last element of the list. This gives us `successor zero`, or `one`. That's the value we've accumuluted "so far." Then we go apply the function `\x sofar. successor sofar` to the two arguments xn-1
and the value `one` that we've accumulates "so far." This gives us `two`. We continue until we get to the start of the list. The value we've then built up "so far" will be the length of the list.
+ What's happening here? We start with the value zero, then we apply the function `\x sofar. successor sofar` to the two arguments xn
and `zero`, where xn
is the last element of the list. This gives us `successor zero`, or `one`. That's the value we've accumuluted "so far." Then we go apply the function `\x sofar. successor sofar` to the two arguments xn-1
and the value `one` that we've accumulated "so far." This gives us `two`. We continue until we get to the start of the list. The value we've then built up "so far" will be the length of the list.
We can use similar techniques to define many recursive operations on lists and numbers. The reason we can do this is that our "version 3," fold-based implementation of lists, and Church's implementations of numbers, have a internal structure that *mirrors* the common recursive operations we'd use lists and numbers for.
@@ -121,7 +163,10 @@ With sufficient ingenuity, a great many functions can be defined in the same way
##However...##
-Some computable functions are just not definable in this way. The simplest function that *simply cannot* be defined using the resources we've so far developed is the Ackermann function:
+Some computable functions are just not definable in this way. We can't, for example, define a function that tells us, for whatever function `f` we supply it, what is the smallest integer `x` where `f x` is `true`.
+
+Neither do the resources we've so far developed suffice to define the
+[[!wikipedia Ackermann function]]:
A(m,n) =
| when m == 0 -> n + 1
@@ -129,9 +174,9 @@ Some computable functions are just not definable in this way. The simplest funct
| else -> A(m-1, A(m,n-1))
A(0,y) = y+1
- A(1,y) = y+2
- A(2,y) = 2y + 3
- A(3,y) = 2^(y+3) -3
+ A(1,y) = 2+(y+3) - 3
+ A(2,y) = 2(y+3) - 3
+ A(3,y) = 2^(y+3) - 3
A(4,y) = 2^(2^(2^...2)) [where there are y+3 2s] - 3
...
@@ -141,11 +186,91 @@ But functions like the Ackermann function require us to develop a more general t
##How to do recursion with lower-case omega##
-...
+Recall our initial, abortive attempt above to define the `get_length` function in the lambda calculus. We said "What we really want to do is something like this:
+
+ \lst. (isempty lst) zero (add one (... (extract-tail lst)))
+
+where this very same formula occupies the `...` position."
+
+We are not going to exactly that, at least not yet. But we are going to do something close to it.
+
+Consider a formula of the following form (don't worry yet about exactly how we'll fill the `...`s):
+
+ \h \lst. (isempty lst) zero (add one (... (extract-tail lst)))
+
+Call that formula `H`. Now what would happen if we applied `H` to itself? Then we'd get back:
+
+ \lst. (isempty lst) zero (add one (... (extract-tail lst)))
+
+where any occurrences of `h` inside the `...` were substituted with `H`. Call this `F`. `F` looks pretty close to what we're after: a function that takes a list and returns zero if it's empty, and so on. And `F` is the result of applying `H` to itself. But now inside `F`, the occurrences of `h` are substituted with the very formula `H` we started with. So if we want to get `F` again, all we have to do is apply `h` to itself---since as we said, the self-application of `H` is how we created `F` in the first place.
+
+So, the way `F` should be completed is:
+
+ \lst. (isempty lst) zero (add one ((h h) (extract-tail lst)))
+
+and our original `H` is:
+
+ \h \lst. (isempty lst) zero (add one ((h h) (extract-tail lst)))
+
+The self-application of `H` will give us `F` with `H` substituted in for its free variable `h`.
+
+Instead of writing out a long formula twice, we could write:
+
+ (\x. x x) LONG-FORMULA
+
+and the initial `(\x. x x)` is just what we earlier called the ω
combinator (lower-case omega, not the non-terminating Ω
). So the self-application of `H` can be written:
+
+
ω (\h \lst. (isempty lst) zero (add one ((h h) (extract-tail lst))))
+
+
+and this will indeed implement the recursive function we couldn't earlier figure out how to define.
+
+In broad brush-strokes, `H` is half of the `get_length` function we're seeking, and `H` has the form:
+
+ \h other-arguments. ... (h h) ...
+
+We get the whole `get_length` function by applying `H` to itself. Then `h` is replaced by the half `H`, and when we later apply `h` to itself, we re-create the whole `get_length` again.
+
+##Neat! Can I make it easier to use?##
+
+Suppose you wanted to wrap this up in a pretty interface, so that the programmer didn't need to write `(h h)` but could just write `g` for some function `g`. How could you do it?
+
+Now the `F`-like expression we'd be aiming for---call it `F*`---would look like this:
+
+ \lst. (isempty lst) zero (add one (g (extract-tail lst)))
+
+or, abbreviating:
+
+ \lst. ...g...
+
+Here we have just a single `g` instead of `(h h)`. We'd want `F*` to be the result of self-applying some `H*`, and then binding to `g` that very self-application of `H*`. We'd get that if `H*` had the form:
+
+ \h. (\g lst. ...g...) (h h)
+
+The self-application of `H*` would be:
+
+ (\h. (\g lst. ...g...) (h h)) (\h. (\g lst. ...g...) (h h))
+
+or:
+
+ (\f. (\h. f (h h)) (\h. f (h h))) (\g lst. ...g...)
+
+The left-hand side of this is known as **the Y-combinator** and so this could be written more compactly as:
+
+ Y (\g lst. ...g...)
+
+or, replacing the abbreviated bits:
+
+ Y (\g lst. (isempty lst) zero (add one (g (extract-tail lst))))
+
+So this is another way to implement the recursive function we couldn't earlier figure out how to define.
+
##Generalizing##
-In general, a **fixed point** of a function f is a value *x* such that fx is equivalent to *x*. For example, what is a fixed point of the function from natural numbers to their squares? What is a fixed point of the successor function?
+Let's step back and fill in some theory to help us understand why these tricks work.
+
+In general, we call a **fixed point** of a function f any value *x* such that f x is equivalent to *x*. For example, what is a fixed point of the function from natural numbers to their squares? What is a fixed point of the successor function?
In the lambda calculus, we say a fixed point of an expression `f` is any formula `X` such that:
@@ -153,7 +278,9 @@ In the lambda calculus, we say a fixed point of an expression `f` is any formula
What is a fixed point of the identity combinator I?
-It's a theorem of the lambda calculus that every formula has a fixed point. In fact, it will have infinitely many, syntactically distinct fixed points. And we don't just know that they exist: for any given formula, we can name many of them.
+What is a fixed point of the false combinator, KI?
+
+It's a theorem of the lambda calculus that every formula has a fixed point. In fact, it will have infinitely many, non-equivalent fixed points. And we don't just know that they exist: for any given formula, we can name many of them.
Yes, even the formula that you're using the define the successor function will have a fixed point. Isn't that weird? Think about how it might be true.
@@ -165,12 +292,349 @@ who knows what we'd get back? Perhaps there's some non-number-representing formu
Yes! That's exactly right. And which formula this is will depend on the particular way you've implemented the successor function.
-Moreover, the recipes that enable us to name fixed points for any given formula aren't *guaranteed* to give us *terminating* fixed points. They might give us formulas X such that neither `X` nor `f X` have normal forms. (Indeed, what they give us for the square function isn't any of the Church numbers, but is rather an expression with no normal form.) However, if we take care we can ensure that we *do* get terminating fixed points. And this gives us a principled, fully general strategy for doing recursion. It lets us define even functions like the Ackermann function, which were until now out of our reach. It would let us define arithmetic and list functions on the "version 1" and "version 2" implementations, where it wasn't always clear how to force the computation to "keep going."
+Moreover, the recipes that enable us to name fixed points for any given formula aren't *guaranteed* to give us *terminating* fixed points. They might give us formulas X such that neither `X` nor `f X` have normal forms. (Indeed, what they give us for the square function isn't any of the Church numerals, but is rather an expression with no normal form.) However, if we take care we can ensure that we *do* get terminating fixed points. And this gives us a principled, fully general strategy for doing recursion. It lets us define even functions like the Ackermann function, which were until now out of our reach. It would also let us define arithmetic and list functions on the "version 1" and "version 2" implementations, where it wasn't always clear how to force the computation to "keep going."
+
+OK, so how do we make use of this?
+
+Recall again our initial, abortive attempt above to define the `get_length` function in the lambda calculus. We said "What we really want to do is something like this:
+
+ \lst. (isempty lst) zero (add one (... (extract-tail lst)))
+
+where this very same formula occupies the `...` position."
+
+If we could somehow get ahold of this very formula, as an additional argument, then we could take the argument and plug it into the `...` position. Something like this:
+
+ \self (\lst. (isempty lst) zero (add one (self (extract-tail lst))) )
+
+This is an abstract of the form:
+
+ \self. BODY
+
+where `BODY` is the expression:
+
+ \lst. (isempty lst) zero (add one (self (extract-tail lst)))
+
+containing an occurrence of `self`.
+
+Now consider what would be a fixed point of our expression `\self. BODY`? That would be some expression `X` such that:
+
+ X <~~> (\self.BODY) X
+
+Beta-reducing the right-hand side, we get:
+
+ X <~~> BODY [self := X]
+
+Think about what this says. It says if you substitute `X` for `self` in our formula BODY:
+
+ \lst. (isempty lst) zero (add one (X (extract-tail lst)))
+
+what you get is "equivalent" to (that is, convertible with) X itself. That is, the `X` inside the above expression is equivalent to the whole expression. So the expression *does*, in a sense, contain itself!
-[Explain in terms of an arbitrary fixed point combinator Ψ.]
+Let's go over that again. If we had a fixed point `X` for our expression `\self. ...self...`, then by the definition of a fixed-point, this has to be true:
-[Give some examples: first, versions of Y and Θ usable with call-by-value. Then do the internal eta-reductions and say these work for call-by-name only.]
+ X <~~> (\self. ...self...) X
-[Explain how what we've done relates to the version using lower-case ω.]
+but beta-reducing the right-hand side, we get something of the form:
+ X <~~> ...X...
+
+So on the right-hand side we have a complex expression, that contains some occurrences of whatever our fixed-point `X` is, and `X` is convertible with *that very complex, right-hand side expression.*
+
+So we really *can* define `get_length` in the way we were initially attempting, in the bare lambda calculus, where Scheme and OCaml's souped-up `let rec` constructions aren't primitively available. (In fact, what we're doing here is the natural way to implement `let rec`.)
+
+This all turns on having a way to generate a fixed-point for our "starting formula":
+
+ \self (\lst. (isempty lst) zero (add one (self (extract-tail lst))) )
+
+Where do we get it?
+
+Suppose we have some **fixed-point combinator**
+Ψ
. That is, some function that returns, for any expression `f` we give it as argument, a fixed point for `f`. In other words:
+
+Ψ f <~~> f (Ψ f)
+
+Then applying Ψ
to the "starting formula" displayed above would give us our fixed point `X` for the starting formula:
+
+Ψ (\self (\lst. (isempty lst) zero (add one (self (extract-tail lst))) ))
+
+And this is the fully general strategy for
+defining recursive functions in the lambda calculus. You begin with a "body formula":
+
+ ...self...
+
+containing free occurrences of `self` that you treat as being equivalent to the body formula itself. In the case we're considering, that was:
+
+ \lst. (isempty lst) zero (add one (self (extract-tail lst)))
+
+You bind the free occurrence of `self` as: `\self. BODY`. And then you generate a fixed point for this larger expression:
+
+Ψ (\self. BODY)
+
+using some fixed-point combinator Ψ
.
+
+Isn't that cool?
+
+##Okay, then give me a fixed-point combinator, already!##
+
+Many fixed-point combinators have been discovered. (And some fixed-point combinators give us models for building infinitely many more, non-equivalent fixed-point combinators.)
+
+Two of the simplest:
+
+Θ′ ≡ (\u f. f (\n. u u f n)) (\u f. f (\n. u u f n))
+Y′ ≡ \f. (\u. f (\n. u u n)) (\u. f (\n. u u n))
+
+Θ′
has the advantage that f (Θ′ f)
really *reduces to* Θ′ f
. Whereas f (Y′ f)
is only *convertible with* Y′ f
; that is, there's a common formula they both reduce to. For most purposes, though, either will do.
+
+You may notice that both of these formulas have eta-redexes inside them: why can't we simplify the two `\n. u u f n` inside Θ′
to just `u u f`? And similarly for Y′
?
+
+Indeed you can, getting the simpler:
+
+Θ ≡ (\u f. f (u u f)) (\u f. f (u u f))
+Y ≡ \f. (\u. f (u u)) (\u. f (u u))
+
+I stated the more complex formulas for the following reason: in a language whose evaluation order is *call-by-value*, the evaluation of Θ (\self. BODY)
and `Y (\self. BODY)` will in general not terminate. But evaluation of the eta-unreduced primed versions will.
+
+Of course, if you define your `\self. BODY` stupidly, your formula will never terminate. For example, it doesn't matter what fixed point combinator you use for Ψ
in:
+
+Ψ (\self. \n. self n)
+
+When you try to evaluate the application of that to some argument `M`, it's going to try to give you back:
+
+ (\n. self n) M
+
+where `self` is equivalent to the very formula `\n. self n` that contains it. So the evaluation will proceed:
+
+ (\n. self n) M ~~>
+ self M ~~>
+ (\n. self n) M ~~>
+ self M ~~>
+ ...
+
+You've written an infinite loop!
+
+However, when we evaluate the application of our:
+
+Ψ (\self (\lst. (isempty lst) zero (add one (self (extract-tail lst))) ))
+
+to some list `L`, we're not going to go into an infinite evaluation loop of that sort. At each cycle, we're going to be evaluating the application of:
+
+ \lst. (isempty lst) zero (add one (self (extract-tail lst)))
+
+to *the tail* of the list we were evaluating its application to at the previous stage. Assuming our lists are finite (and the implementations we're using don't permit otherwise), at some point one will get a list whose tail is empty, and then the evaluation of that formula to that tail will return `zero`. So the recursion eventually bottoms out in a base value.
+
+##Fixed-point Combinators Are a Bit Intoxicating##
+
+![tatoo](/y-combinator-fixed.jpg)
+
+There's a tendency for people to say "Y-combinator" to refer to fixed-point combinators generally. We'll probably fall into that usage ourselves. Speaking correctly, though, the Y-combinator is only one of many fixed-point combinators.
+
+I used Ψ
above to stand in for an arbitrary fixed-point combinator. I don't know of any broad conventions for this. But this seems a useful one.
+
+As we said, there are many other fixed-point combinators as well. For example, Jan Willem Klop pointed out that if we define `L` to be:
+
+ \a b c d e f g h i j k l m n o p q s t u v w x y z r. (r (t h i s i s a f i x e d p o i n t c o m b i n a t o r))
+
+then this is a fixed-point combinator:
+
+ L L L L L L L L L L L L L L L L L L L L L L L L L L
+
+
+##Watching Y in action##
+
+For those of you who like to watch ultra slow-mo movies of bullets
+piercing apples, here's a stepwise computation of the application of a
+recursive function. We'll use a function `sink`, which takes one
+argument. If the argument is boolean true (i.e., `\x y.x`), it
+returns itself (a copy of `sink`); if the argument is boolean false
+(`\x y. y`), it returns `I`. That is, we want the following behavior:
+
+ sink false ~~> I
+ sink true false ~~> I
+ sink true true false ~~> I
+ sink true true true false ~~> I
+
+So we make `sink = Y (\f b. b f I)`:
+
+ 1. sink false
+ 2. Y (\fb.bfI) false
+ 3. (\f. (\h. f (h h)) (\h. f (h h))) (\fb.bfI) false
+ 4. (\h. [\fb.bfI] (h h)) (\h. [\fb.bfI] (h h)) false
+ 5. [\fb.bfI] ((\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))) false
+ 6. (\b.b[(\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))]I) false
+ 7. false [(\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))] I
+ --------------------------------------------
+ 8. I
+
+So far so good. The crucial thing to note is that as long as we
+always reduce the outermost redex first, we never have to get around
+to computing the underlined redex: because `false` ignores its first
+argument, we can throw it away unreduced.
+
+Now we try the next most complex example:
+
+ 1. sink true false
+ 2. Y (\fb.bfI) true false
+ 3. (\f. (\h. f (h h)) (\h. f (h h))) (\fb.bfI) true false
+ 4. (\h. [\fb.bfI] (h h)) (\h. [\fb.bfI] (h h)) true false
+ 5. [\fb.bfI] ((\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))) true false
+ 6. (\b.b[(\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))]I) true false
+ 7. true [(\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))] I false
+ 8. [(\h. [\fb.bsI] (h h))(\h. [\fb.bsI] (h h))] false
+
+We've now arrived at line (4) of the first computation, so the result
+is again I.
+
+You should be able to see that `sink` will consume as many `true`s as
+we throw at it, then turn into the identity function after it
+encounters the first `false`.
+
+The key to the recursion is that, thanks to Y, the definition of
+`sink` contains within it the ability to fully regenerate itself as
+many times as is necessary. The key to *ending* the recursion is that
+the behavior of `sink` is sensitive to the nature of the input: if the
+input is the magic function `false`, the self-regeneration machinery
+will be discarded, and the recursion will stop.
+
+That's about as simple as recursion gets.
+
+##Base cases, and their lack##
+
+As any functional programmer quickly learns, writing a recursive
+function divides into two tasks: figuring out how to handle the
+recursive case, and remembering to insert a base case. The
+interesting and enjoyable part is figuring out the recursive pattern,
+but the base case cannot be ignored, since leaving out the base case
+creates a program that runs forever. For instance, consider computing
+a factorial: `n!` is `n * (n-1) * (n-2) * ... * 1`. The recursive
+case says that the factorial of a number `n` is `n` times the
+factorial of `n-1`. But if we leave out the base case, we get
+
+ 3! = 3 * 2! = 3 * 2 * 1! = 3 * 2 * 1 * 0! = 3 * 2 * 1 * 0 * -1! ...
+
+That's why it's crucial to declare that 0! = 1, in which case the
+recursive rule does not apply. In our terms,
+
+ fac = Y (\fac n. iszero n 1 (fac (predecessor n)))
+
+If `n` is 0, `fac` reduces to 1, without computing the recursive case.
+
+There is a well-known problem in philosophy and natural language
+semantics that has the flavor of a recursive function without a base
+case: the truth-teller paradox (and related paradoxes).
+
+(1) This sentence is true.
+
+If we assume that the complex demonstrative "this sentence" can refer
+to (1), then the proposition expressed by (1) will be true just in
+case the thing referred to by *this sentence* is true. Thus (1) will
+be true just in case (1) is true, and (1) is true just in case (1) is
+true, and so on. If (1) is true, then (1) is true; but if (1) is not
+true, then (1) is not true.
+
+Without pretending to give a serious analysis of the paradox, let's
+assume that sentences can have for their meaning boolean functions
+like the ones we have been working with here. Then the sentence *John
+is John* might denote the function `\x y. x`, our `true`.
+
+Then (1) denotes a function from whatever the referent of *this
+sentence* is to a boolean. So (1) denotes `\f. f true false`, where
+the argument `f` is the referent of *this sentence*. Of course, if
+`f` is a boolean, `f true false <~~> f`, so for our purposes, we can
+assume that (1) denotes the identity function `I`.
+
+If we use (1) in a context in which *this sentence* refers to the
+sentence in which the demonstrative occurs, then we must find a
+meaning `m` such that `I m = I`. But since in this context `m` is the
+same as the meaning `I`, so we have `m = I m`. In other words, `m` is
+a fixed point for the denotation of the sentence (when used in the
+appropriate context).
+
+That means that in a context in which *this sentence* refers to the
+sentence in which it occurs, the sentence denotes a fixed point for
+the identity function. Here's a fixed point for the identity
+function:
+
+Y I
+(\f. (\h. f (h h)) (\h. f (h h))) I
+(\h. I (h h)) (\h. I (h h)))
+(\h. (h h)) (\h. (h h)))
+ω ω
+&Omega
+
+
+Oh. Well! That feels right. The meaning of *This sentence is true*
+in a context in which *this sentence* refers to the sentence in which
+it occurs is Ω
, our prototypical infinite loop...
+
+What about the liar paradox?
+
+(2) This sentence is false.
+
+Used in a context in which *this sentence* refers to the utterance of
+(2) in which it occurs, (2) will denote a fixed point for `\f.neg f`,
+or `\f l r. f r l`, which is the `C` combinator. So in such a
+context, (2) might denote
+
+ Y C
+ (\f. (\h. f (h h)) (\h. f (h h))) I
+ (\h. C (h h)) (\h. C (h h)))
+ C ((\h. C (h h)) (\h. C (h h)))
+ C (C ((\h. C (h h))(\h. C (h h))))
+ C (C (C ((\h. C (h h))(\h. C (h h)))))
+ ...
+
+And infinite sequence of `C`s, each one negating the remainder of the
+sequence. Yep, that feels like a reasonable representation of the
+liar paradox.
+
+See Barwise and Etchemendy's 1987 OUP book, [The Liar: an essay on
+truth and circularity](http://tinyurl.com/2db62bk) for an approach
+that is similar, but expressed in terms of non-well-founded sets
+rather than recursive functions.
+
+##However...##
+You should be cautious about feeling too comfortable with
+these results. Thinking again of the truth-teller paradox, yes,
+Ω
is *a* fixed point for `I`, and perhaps it has
+some a privileged status among all the fixed points for `I`, being the
+one delivered by Y and all (though it is not obvious why Y should have
+any special status).
+
+But one could ask: look, literally every formula is a fixed point for
+`I`, since
+
+ X <~~> I X
+
+for any choice of X whatsoever.
+
+So the Y combinator is only guaranteed to give us one fixed point out
+of infinitely many---and not always the intuitively most useful
+one. (For instance, the squaring function has zero as a fixed point,
+since 0 * 0 = 0, and 1 as a fixed point, since 1 * 1 = 1, but `Y
+(\x. mul x x)` doesn't give us 0 or 1.) So with respect to the
+truth-teller paradox, why in the reasoning we've
+just gone through should we be reaching for just this fixed point at
+just this juncture?
+
+One obstacle to thinking this through is the fact that a sentence
+normally has only two truth values. We might consider instead a noun
+phrase such as
+
+(3) the entity that this noun phrase refers to
+
+The reference of (3) depends on the reference of the embedded noun
+phrase *this noun phrase*. It's easy to see that any object is a
+fixed point for this referential function: if this pen cap is the
+referent of *this noun phrase*, then it is the referent of (3), and so
+for any object.
+
+The chameleon nature of (3), by the way (a description that is equally
+good at describing any object), makes it particularly well suited as a
+gloss on pronouns such as *it*. In the system of
+[Jacobson 1999](http://www.springerlink.com/content/j706674r4w217jj5/),
+pronouns denote (you guessed it!) identity functions...
+
+Ultimately, in the context of this course, these paradoxes are more
+useful as a way of gaining leverage on the concepts of fixed points
+and recursion, rather than the other way around.