.
@@ 293,7 +278,7 @@ It's often said that dynamic systems are distinguished because they are the ones
false and * = false
false and false = false
And then we'd notice that `* and false` has a different intepretation than `false and *`. (The same phenomenon is already present with the mateial conditional in bivalent logics; but seeing that a nonsymmetric semantics for `and` is available even for functional languages is instructive.)
+And then we'd notice that `* and false` has a different intepretation than `false and *`. (The same phenomenon is already present with the material conditional in bivalent logics; but seeing that a nonsymmetric semantics for `and` is available even for functional languages is instructive.)
Another way in which order can matter that's present even in functional languages is that the interpretation of some complex expressions can depend on the order in which subexpressions are evaluated. Evaluated in one order, the computations might never terminate (and so semantically we interpret them as having "the bottom value"we'll discuss this). Evaluated in another order, they might have a perfectly mundane value. Here's an example, though we'll reserve discussion of it until later:
@@ 320,7 +305,7 @@ Finally, you'll see the term **dynamic** used in a variety of ways in the litera
* dynamic versus static typing
* dynamic versus lexical scoping
+* dynamic versus lexical [[!wikipedia Scope (programming) desc="scoping"]]
* dynamic versus static control operators
@@ 328,6 +313,16 @@ Finally, you'll see the term **dynamic** used in a variety of ways in the litera
For the most part, these uses are only loosely connected to each other. We'll tend to use "imperatival" to describe the kinds of semantic properties made available in dynamic semantics, languages which have robust notions of sequencing changes, and so on.
+To read further about the relation between declarative or functional programming, on the one hand, and imperatival programming on the other, you can begin here:
+
+* [[!wikipedia Declarative programming]]
+* [[!wikipedia Functional programming]]
+* [[!wikipedia Purely functional]]
+* [[!wikipedia Referential transparency (computer science)]]
+* [[!wikipedia Imperative programming]]
+* [[!wikipedia Side effect (computer science) desc="Side effects"]]
+
+
Map
===
@@ 335,11 +330,11 @@ Map
Scheme (functional part)
OCaml (functional part)
C, Java, Pasval
+C, Java, Python
Scheme (imperative part)
OCaml (imperative part)
lambda calculus
+untyped lambda calculus
combinatorial logic
 Turing complete 
@@ 354,32 +349,73 @@ combinatorial logic
+
Rosetta Stone
=============
Here's how it looks to say the same thing in various of these languages.
1. Binding suitable values to the variables `three` and `two`, and adding them.
+The following site may be useful; it lets you run a Scheme interpreter inside your web browser: [Try Scheme in your web browser](http://tryscheme.sourceforge.net/). See also our links about [[learning Scheme]] and [[learning OCaml]].
+
+
+
+1. Function application and parentheses
+
+ In Scheme and the lambda calculus, the functions you're applying always go to the left. So you write `(foo 2)` and also `(+ 2 3)`.
+
+ Mostly that's how OCaml is written too:
+
+ foo 2
+
+ But a few familiar binary operators can be written infix, so:
+
+ 2 + 3
+
+ You can also write them operatorleftmost, if you put them inside parentheses to help the parser understand you:
+
+ ( + ) 2 3
+
+ I'll mostly do this, for uniformity with Scheme and the lambda calculus.
+
+ In OCaml and the lambda calculus, this:
+
+ foo 2 3
+
+ means the same as:
+
+ ((foo 2) 3)
+
+ These functions are "curried". `foo 2` returns a `2`fooer, which waits for an argument like `3` and then foos `2` to it. `( + ) 2` returns a `2`adder, which waits for an argument like `3` and then adds `2` to it. For further reading:
+
+* [[!wikipedia Currying]]
+
+ In Scheme, on the other hand, there's a difference between `((foo 2) 3)` and `(foo 2 3)`. Scheme distinguishes between unary functions that return unary functions and binary functions. For our seminar purposes, it will be easiest if you confine yourself to unary functions in Scheme as much as possible.
+
+ Scheme is very sensitive to parentheses and whenever you want a function applied to any number of arguments, you need to wrap the function and its arguments in a parentheses. So you have to write `(foo 2)`; if you only say `foo 2`, Scheme won't understand you.
+
+ Scheme uses a lot of parentheses, and they are always significant, never optional. Often the parentheses mean "apply this function to these arguments," as just described. But in a moment we'll see other constructions in Scheme where the parentheses have different roles. They do lots of different work in Scheme.
+
+
+2. Binding suitable values to the variables `three` and `two`, and adding them.
In Scheme:
(let* ((three 3))
 (let ((two 2))
+ (let* ((two 2))
(+ three two)))
 In OCaml:
+ Most of the parentheses in this construction *aren't* playing the role of applying a function to some argumentsonly the ones in `(+ three two)` are doing that.
 let three = 3 in
 let two = 2 in
 three + two
 Notice OCaml lets you write the `+` in between the `three` and `two`, as you're accustomed to. However most functions need to come leftmost, even if they're binary. And you can do this with `+` too, if you enclose it in parentheses so that the OCaml parser doesn't get confused by your syntax:
+ In OCaml:
let three = 3 in
let two = 2 in
( + ) three two
 In the lambda calculus: here we're on our own, we don't have predefined constants like `+` and `3` and `2` to work with. We've got to build up everything from scratch. We'll be seeing how to do that over the next weeks.
+ In the lambda calculus:
+
+ Here we're on our own, we don't have predefined constants like `+` and `3` and `2` to work with. We've got to build up everything from scratch. We'll be seeing how to do that over the next weeks.
But supposing you had constructed appropriate values for `+` and `3` and `2`, you'd place them in the ellided positions in:
@@ 414,23 +450,27 @@ Here's how it looks to say the same thing in various of these languages.
Of course you don't need to remember any of this syntax. We're just illustrating it so that you see that in Scheme and OCaml it looks somewhat different than we had above. The difference is much more obvious than it is in C.
 In the lambda calculus: sorry, you can't do mutation. At least, not natively. Later in the term we'll be learning how in fact, really, you can embed mutation inside the lambda calculus even though the lambda calculus has no primitive facilities for mutation.
+ In the lambda calculus:
+ Sorry, you can't do mutation. At least, not natively. Later in the term we'll be learning how in fact, really, you can embed mutation inside the lambda calculus even though the lambda calculus has no primitive facilities for mutation.
3. Anonymous functions
 Functions are "firstclass values" in the lambda calculus, in Scheme, and in OCaml. What that means is that they can be arguments to other functions. They can be the results of the application of other functions to some arguments. They can be stored in data structures. And so on.
+ Functions are "firstclass values" in the lambda calculus, in Scheme, and in OCaml. What that means is that they can be arguments to, and results of, other functions. They can be stored in data structures. And so on. To read further:
+
+ * [[!wikipedia Higherorder function]]
+ * [[!wikipedia Firstclass function]]
 First, we'll show what "anonymous" functions look like. These are functions that have not been bound as values to any variables. That is, there are no variables whose value they are.
+ We'll begin by looking at what "anonymous" functions look like. These are functions that have not been bound as values to any variables. That is, there are no variables whose value they are.
In the lambda calculus:
(\x M)
 is always anonymous! Here `M` stands for any expression of the language, simple or complex. It's only when you do
+ where `M` is any simple or complex expressionis anonymous. It's only when you do:
((\y N) (\x M))
@@ 440,29 +480,14 @@ Here's how it looks to say the same thing in various of these languages.
(lambda (x) M)
 Not very different, right? For example, if `M` stands for `(+ 3 x)`, then this is an anonymous function that adds 3 to whatever argument it's given:
+ Not very different, right? For example, if `M` stands for `(+ 3 x)`, then here is an anonymous function that adds 3 to whatever argument it's given:
(lambda (x) (+ 3 x))
 Scheme uses a lot of parentheses, and they are always significant, never optional. In `(+ 3 x)` the parentheses mean "apply the function `+` to the arguments `3` and `x`. In `(lambda (x) ...)` the parentheses have a different meaning: they mark where the anonymous function you're defining begins and ends, and so on. As you'll see, parentheses have yet further roles in Scheme. I know it's confusing.

In OCaml, we write our anonymous function like this:
 fun x > (3 + x)

 or:

 fun x > (( + ) 3 x)

 In OCaml, parentheses only serve a grouping function and they often can be omitted. Or more could be added. For instance, we could equally well say:

fun x > ( + ) 3 x
 or:

 (fun x > (( + ) (3) (x)))

 As we saw above, parentheses can often be omitted in the lambda calculus too. But not in Scheme. Every parentheses has a specific role.
4. Supplying an argument to an anonymous function
@@ 470,7 +495,7 @@ Here's how it looks to say the same thing in various of these languages.
((lambda (x) (+ 3 x)) 2)
 The outermost parentheses here mean "apply the function `(lambda (x) (+ 3 x))` to the argument `2`.
+ The outermost parentheses here mean "apply the function `(lambda (x) (+ 3 x))` to the argument `2`, or equivalently, "give the value `2` as an argument to the function `(lambda (x) (+ 3 x))`.
In OCaml:
@@ 482,10 +507,10 @@ Here's how it looks to say the same thing in various of these languages.
Let's go back and reconsider this Scheme expression:
(let* ((three 3))
 (let ((two 2))
+ (let* ((two 2))
(+ three two)))
 Scheme also has a simple `let` (without the `*`), and it permits you to group several variable bindings together in a single `let` or `let*`statement, like this:
+ Scheme also has a simple `let` (without the ` *`), and it permits you to group several variable bindings together in a single `let` or `let*`statement, like this:
(let* ((three 3) (two 2))
(+ three two))
@@ 493,23 +518,23 @@ Here's how it looks to say the same thing in various of these languages.
Often you'll get the same results whether you use `let*` or `let`. However, there are cases where it makes a difference, and in those cases, `let*` behaves more like you'd expect. So you should just get into the habit of consistently using that. It's also good discipline for this seminar, especially while you're learning, to write things out the longer way, like this:
(let* ((three 3))
 (let ((two 2))
+ (let* ((two 2))
(+ three two)))
However, here you've got the double parentheses in `(let* ((three 3)) ...)`. They're doubled because the syntax permits more assignments than just the assignment of the value `3` to the variable `three`. Myself I tend to use `[` and `]` for the outer of these parentheses: `(let* [(three 3)] ...)`. Scheme can be configured to parse `[...]` as if they're just more `(...)`.
 Someone asked in seminar if the `3` could be replaced by a more complex expression. The answer is "yes". You could also write:
+ It was asked in seminar if the `3` could be replaced by a more complex expression. The answer is "yes". You could also write:
(let* [(three (+ 1 2))]
 (let [(two 2)]
+ (let* [(two 2)]
(+ three two)))
 The question also came up whether the `(+ 1 2)` computation would be performed before or after it was bound to the variable `three`. That's a terrific question. Let's say this: both strategies could be reasonable designs for a language. We are going to discuss this carefully in coming weeks. In fact Scheme and OCaml make the same design choice. But you should think of the underlying form of the `let`statement as not settling this by itself.
+ It was also asked whether the `(+ 1 2)` computation would be performed before or after it was bound to the variable `three`. That's a terrific question. Let's say this: both strategies could be reasonable designs for a language. We are going to discuss this carefully in coming weeks. In fact Scheme and OCaml make the same design choice. But you should think of the underlying form of the `let`statement as not settling this by itself.
Repeating our starting point for reference:
(let* [(three 3)]
 (let [(two 2)]
+ (let* [(two 2)]
(+ three two)))
Recall in OCaml this same computation was written:
@@ 536,7 +561,7 @@ Here's how it looks to say the same thing in various of these languages.
(let* [(bar (lambda (x) B))] M)
 then wherever `bar` occurs in `M` (and isn't rebound by a more local "let" or "lambda"), it will be interpreted as the function `(lambda (x) B)`.
+ then wherever `bar` occurs in `M` (and isn't rebound by a more local `let` or `lambda`), it will be interpreted as the function `(lambda (x) B)`.
Similarly, in OCaml:
@@ 551,7 +576,7 @@ Here's how it looks to say the same thing in various of these languages.
((lambda (bar) (bar A)) (lambda (x) B))
 which, as we'll see, is equivalent to:
+ which betareduces to:
((lambda (x) B) A)
@@ 596,8 +621,7 @@ Here's how it looks to say the same thing in various of these languages.
let x = A;;
... rest of the file or interactive session ...
 It's easy to be lulled into thinking this is a kind of imperative construction. *But it's not!* It's really just a shorthand for the compound "let"expressions we've already been looking at, taking the maximum syntactically permissible scope. (Compare the "dot" convention in the lambda calculus, discussed above.)

+ It's easy to be lulled into thinking this is a kind of imperative construction. *But it's not!* It's really just a shorthand for the compound `let`expressions we've already been looking at, taking the maximum syntactically permissible scope. (Compare the "dot" convention in the lambda calculus, discussed above. I'm fudging a bit here, since in Scheme `(define ...)` is really shorthand for a `letrec` epression, which we'll come to in later classes.)
9. Some shorthand
@@ 669,17 +693,20 @@ Here's how it looks to say the same thing in various of these languages.
and there's no more mutation going on there than there is in:
  ∀x. (F x or ∀x (not (F x)))

+ ∀x. (F x or ∀x (not (F x)))
+
When a previouslybound variable is rebound in the way we see here, that's called **shadowing**: the outer binding is shadowed during the scope of the inner binding.
+ See also:
+
+ * [[!wikipedia Variable shadowing]]
+
Some more comparisons between Scheme and OCaml

11. Simple predefined values
+* Simple predefined values
Numbers in Scheme: `2`, `3`
In OCaml: `2`, `3`
@@ 690,18 +717,18 @@ Some more comparisons between Scheme and OCaml
The eighth letter in the Latin alphabet, in Scheme: `#\h`
In OCaml: `'h'`
12. Compound values
+* Compound values
These are values which are built up out of (zero or more) simple values.
 Ordered pairs in Scheme: `'(2 . 3)`
+ Ordered pairs in Scheme: `'(2 . 3)` or `(cons 2 3)`
In OCaml: `(2, 3)`
 Lists in Scheme: `'(2 3)`
+ Lists in Scheme: `'(2 3)` or `(list 2 3)`
In OCaml: `[2; 3]`
We'll be explaining the difference between pairs and lists next week.
 The empty list, in Scheme: `'()`
+ The empty list, in Scheme: `'()` or `(list)`
In OCaml: `[]`
The string consisting just of the eighth letter of the Latin alphabet, in Scheme: `"h"`
@@ 713,17 +740,6 @@ Some more comparisons between Scheme and OCaml
A shorter string, in Scheme: `""`
In OCaml: `""`
13. Function application

 Binary functions in OCaml: `foo 2 3`

 Or: `( + ) 2 3`

 These are the same as: `((foo 2) 3)`. In other words, functions in OCaml are "curried". `foo 2` returns a `2`fooer, which waits for an argument like `3` and then foos `2` to it. `( + ) 2` returns a `2`adder, which waits for an argument like `3` and then adds `2` to it.

 In Scheme, on the other hand, there's a difference between `((foo 2) 3)` and `(foo 2 3)`. Scheme distinguishes between unary functions that return unary functions and binary functions. For our seminar purposes, it will be easiest if you confine yourself to unary functions in Scheme as much as possible.

 Additionally, as said above, Scheme is very sensitive to parentheses and whenever you want a function applied to any number of arguments, you need to wrap the function and its arguments in a parentheses.
What "sequencing" is and isn't
@@ 748,7 +764,7 @@ Or even:
(define foo B)
(foo 2)
don't involve any changes or sequencing in the sense we're trying to identify. As we said, these programs are just syntactic variants of (single) compound syntactic structures involving "let"s and "lambda"s.
+don't involve any changes or sequencing in the sense we're trying to identify. As we said, these programs are just syntactic variants of (single) compound syntactic structures involving `let`s and `lambda`s.
Since Scheme and OCaml also do permit imperatival constructions, they do have syntax for genuine sequencing. In Scheme it looks like this:
@@ 787,18 +803,5 @@ contributes no more to a larger context in which it's embedded than C does. This
We'll discuss this more as the seminar proceeds.
1. Declarative vs imperatival models of computation.
2. Variety of ways in which "order can matter."
3. Variety of meanings for "dynamic."
4. Schoenfinkel, Curry, Church: a brief history
5. Functions as "firstclass values"
6. "Curried" functions

1. Beta reduction
1. Encoding pairs (and triples and ...)
1. Encoding booleans


