Refunctionalizing list zippers
------------------------------
If zippers are continuations reified (defuntionalized), then one route
to continuations is to re-functionalize a zipper. Then the
concreteness and understandability of the zipper provides a way of
understanding an equivalent treatment using continuations.
Let's work with lists of `char`s for a change. To maximize readability, we'll
indulge in an abbreviatory convention that "abSd" abbreviates the
list `['a'; 'b'; 'S'; 'd']`.
We will set out to compute a deceptively simple-seeming **task: given a
string, replace each occurrence of 'S' in that string with a copy of
the string up to that point.**
We'll define a function `t` (for "task") that maps strings to their
updated version.
Expected behavior:
t "abSd" ~~> "ababd"
In linguistic terms, this is a kind of anaphora
resolution, where `'S'` is functioning like an anaphoric element, and
the preceding string portion is the antecedent.
This deceptively simple task gives rise to some mind-bending complexity.
Note that it matters which 'S' you target first (the position of the *
indicates the targeted 'S'):
t "aSbS"
*
~~> t "aabS"
*
~~> "aabaab"
versus
t "aSbS"
*
~~> t "aSbaSb"
*
~~> t "aabaSb"
*
~~> "aabaaabab"
versus
t "aSbS"
*
~~> t "aSbaSb"
*
~~> t "aSbaaSbab"
*
~~> t "aSbaaaSbaabab"
*
~~> ...
Aparently, this task, as simple as it is, is a form of computation,
and the order in which the `'S'`s get evaluated can lead to divergent
behavior.
For now, we'll agree to always evaluate the leftmost `'S'`, which
guarantees termination, and a final string without any `'S'` in it.
This is a task well-suited to using a zipper. We'll define a function
`tz` (for task with zippers), which accomplishes the task by mapping a
`char list zipper` to a `char list`. We'll call the two parts of the
zipper `unzipped` and `zipped`; we start with a fully zipped list, and
move elements to the unzipped part by pulling the zipper down until the
entire list has been unzipped (and so the zipped half of the zipper is empty).
type 'a list_zipper = ('a list) * ('a list);;
let rec tz (z : char list_zipper) =
match z with
| (unzipped, []) -> List.rev(unzipped) (* Done! *)
| (unzipped, 'S'::zipped) -> tz ((List.append unzipped unzipped), zipped)
| (unzipped, target::zipped) -> tz (target::unzipped, zipped);; (* Pull zipper *)
# tz ([], ['a'; 'b'; 'S'; 'd']);;
- : char list = ['a'; 'b'; 'a'; 'b'; 'd']
# tz ([], ['a'; 'S'; 'b'; 'S']);;
- : char list = ['a'; 'a'; 'b'; 'a'; 'a'; 'b']
Note that this implementation enforces the evaluate-leftmost rule.
Task completed.
One way to see exactly what is going on is to watch the zipper in
action by tracing the execution of `tz`. By using the `#trace`
directive in the OCaml interpreter, the system will print out the
arguments to `tz` each time it is (recurcively) called. Note that the
lines with left-facing arrows (`<--`) show (recursive) calls to `tz`,
giving the value of its argument (a zipper), and the lines with
right-facing arrows (`-->`) show the output of each recursive call, a
simple list.
# #trace tz;;
t1 is now traced.
# tz ([], ['a'; 'b'; 'S'; 'd']);;
tz <-- ([], ['a'; 'b'; 'S'; 'd'])
tz <-- (['a'], ['b'; 'S'; 'd']) (* Pull zipper *)
tz <-- (['b'; 'a'], ['S'; 'd']) (* Pull zipper *)
tz <-- (['b'; 'a'; 'b'; 'a'], ['d']) (* Special step *)
tz <-- (['d'; 'b'; 'a'; 'b'; 'a'], []) (* Pull zipper *)
tz --> ['a'; 'b'; 'a'; 'b'; 'd'] (* Output reversed *)
tz --> ['a'; 'b'; 'a'; 'b'; 'd']
tz --> ['a'; 'b'; 'a'; 'b'; 'd']
tz --> ['a'; 'b'; 'a'; 'b'; 'd']
tz --> ['a'; 'b'; 'a'; 'b'; 'd']
- : char list = ['a'; 'b'; 'a'; 'b'; 'd']
The nice thing about computations involving lists is that it's so easy
to visualize them as a data structure. Eventually, we want to get to
a place where we can talk about more abstract computations. In order
to get there, we'll first do the exact same thing we just did with
concrete zipper using procedures.
Think of a list as a procedural recipe: `['a'; 'b'; 'S'; 'd']` is the result of
the computation `'a'::('b'::('S'::('d'::[])))` (or, in our old style,
`make_list 'a' (make_list 'b' (make_list 'S' (make_list 'd' empty)))`). The
recipe for constructing the list goes like this:
> (0) Start with the empty list []
> (1) make a new list whose first element is 'd' and whose tail is the list constructed in step (0)
> (2) make a new list whose first element is 'S' and whose tail is the list constructed in step (1)
> -----------------------------------------
> (3) make a new list whose first element is 'b' and whose tail is the list constructed in step (2)
> (4) make a new list whose first element is 'a' and whose tail is the list constructed in step (3)
What is the type of each of these steps? Well, it will be a function
from the result of the previous step (a list) to a new list: it will
be a function of type `char list -> char list`. We'll call each step
(or group of steps) a **continuation** of the previous steps. So in this
context, a continuation is a function of type `char list -> char
list`. For instance, the continuation corresponding to the portion of
the recipe below the horizontal line is the function `fun (tail : char
list) -> 'a'::('b'::tail)`.
This means that we can now represent the unzipped part of our
zipper---the part we've already unzipped---as a continuation: a function
describing how to finish building a list. We'll write a new
function, `tc` (for task with continuations), that will take an input
list (not a zipper!) and a continuation `k` (it's conventional to use `k` for continuation variables) and return a processed list.
The structure and the behavior will follow that of `tz` above, with
some small but interesting differences. We've included the orginal
`tz` to facilitate detailed comparison:
let rec tz (z : char list_zipper) =
match z with
| (unzipped, []) -> List.rev(unzipped) (* Done! *)
| (unzipped, 'S'::zipped) -> tz ((List.append unzipped unzipped), zipped)
| (unzipped, target::zipped) -> tz (target::unzipped, zipped);; (* Pull zipper *)
let rec tc (l: char list) (k: (char list) -> (char list)) =
match l with
| [] -> List.rev (k [])
| 'S'::zipped -> tc zipped (fun tail -> k (k tail))
| target::zipped -> tc zipped (fun tail -> target::(k tail));;
# tc ['a'; 'b'; 'S'; 'd'] (fun tail -> tail);;
- : char list = ['a'; 'b'; 'a'; 'b']
# tc ['a'; 'S'; 'b'; 'S'] (fun tail -> tail);;
- : char list = ['a'; 'a'; 'b'; 'a'; 'a'; 'b']
To emphasize the parallel, I've re-used the names `zipped` and
`target`. The trace of the procedure will show that these variables
take on the same values in the same series of steps as they did during
the execution of `tz` above. There will once again be one initial and
four recursive calls to `tc`, and `zipped` will take on the values
`"bSd"`, `"Sd"`, `"d"`, and `""` (and, once again, on the final call,
the first `match` clause will fire, so the the variable `zipped` will
not be instantiated).
I have not called the functional argument `unzipped`, although that is
what the parallel would suggest. The reason is that `unzipped` is a
list, but `k` is a function. That's the most crucial difference, the
point of the excercise, and it should be emphasized. For instance,
you can see this difference in the fact that in `tz`, we have to glue
together the two instances of `unzipped` with an explicit (and
relatively inefficient) `List.append`.
In the `tc` version of the task, we simply compose `k` with itself:
`k o k = fun tail -> k (k tail)`.
A call `tc ['a'; 'b'; 'S'; 'd']` yields a partially-applied function; it still waits for another argument, a continuation of type `char list -> char list`. We have to give it an "initial continuation" to get started. Here we supply *the identity function* as the initial continuation. Why did we choose that? Well, if
you have already constructed the initial list `"abSd"`, what's the desired continuation? What's the next step in the recipe to produce the desired result, i.e, the very same list, `"abSd"`? Clearly, the identity function.
A good way to test your understanding is to figure out what the
continuation function `k` must be at the point in the computation when
`tc` is called with the first argument `"Sd"`. Two choices: is it
`fun tail -> 'a'::'b'::tail`, or it is `fun tail -> 'b'::'a'::tail`? The way to see if
you're right is to execute the following command and see what happens:
tc ['S'; 'd'] (fun tail -> 'a'::'b'::tail);;
There are a number of interesting directions we can go with this task.
The reason this task was chosen is because it can be viewed as a
simplified picture of a computation using continuations, where `'S'`
plays the role of a continuation operator. (It works like the Scheme operators `shift` or `control`; the differences between them don't manifest themselves in this example.) In the analogy, the input list portrays a
sequence of functional applications, where `[f1; f2; f3; x]` represents
`f1(f2(f3 x))`. The limitation of the analogy is that it is only
possible to represent computations in which the applications are
always right-branching, i.e., the computation `((f1 f2) f3) x` cannot
be directly represented.
One way to extend this exercise would be to add a special symbol `'#'`,
and then the task would be to copy from the target `'S'` only back to
the closest `'#'`. This would allow our task to simulate delimited
continuations with embedded `prompt`s (also called `reset`s).
The reason the task is well-suited to the list zipper is in part
because the list monad has an intimate connection with continuations.
We'll explore this next.